Cookie Img Back to top
+918061882841
Send SMS    Call Me Free Offline Send Inquiry
Home » Products » Weigh in Motion System » Slow Speed WIM

Slow Speed WIM

Slow Speed WIM
Send Inquiry
Product Code : 01
Price And Quantity
  • Minimum Order Quantity
  • 1
  • Unit of Measure
  • Unit/Units
Product Description

With an aim to be a market leader in our domain, we have been engaged in the business of manufacturing and supplying Slow Speed WIM. It is installed at toll plaza, entry points, or borders to check the weight of vehicles. Abbreviated for weight in motion, this WIM is made having a sturdy steel plate with load cells. It serves as a standalone system for verification of overload conditions. Slow Speed WIM is mounted at the ground level with the help of fasteners.

Features:

 

  • Accurately weigh at the vehicle speed of 0 to 20 kilometers per hour

  • Ability to withstand adverse climatic conditions

  • Low maintenance

 

 

Slow Speed WIM

Indicator

The MVR Weight Indicator for In-Motion Vehicle Scale offers the ideal combination of accuracy and speed.

  • GLCD display with four keys on the front panel of eldon MS box.
  • Serial strings for communication as per your requirement.
  • Logic with two loops and one IRS (pnp) type.
  • MVR will supply two parallel sensing Light curtains with each controller.
  • The Light curtains will installed in a box near WIM along with junction box by MVR
  • A power supply of 24V to drive IRS.
  • LEDs on mother board for loop sensors and IRS.
  • This is low speed (max speed 20 kmph) system with accuracy of 2-4% of fsc and depends on the level of section before and after weighing zone.

Key Benefits

  • High vehicle throughput
  • Maximize operational Productivity and cost savings
  • Gross weight, axle weights, numbers of axles can be recorded along with average speed
  • Suitable for overload detection, statistic data collection, road maintenance planning etc.

Technical Specifications (Slow Speed WIM)

Details

Description

Capacity

User Selectable

Stationary Accuracy

±0.05% FSR* (depends on field conditions, installation, structure and load cells also)

In-Motion Accuracy with respect to Speed

±1-3% FSR up to speed of 20 km/hr (depends on field conditions, installation, structure and loadcells also)

Type of In motion scale

Load cell based permanent In-motion scale.

Operational Temperature

0ËšC to 50ËšC

Power supply

AC single Phase 230V, 50 Hz

Load Cells

MVR LC’S are double ended shear beam load cell ideally suited for Truck, track, onboard weighing applications. Its construction of high alloy tool steel provides optimum protection under impact loading & adverse conditions. The cell is environmentally protected with waterproof seal and is Electro less nickel plated to assure resistance against corrosion.

Performance Specification

Standard Capacity

10,15,20,22.5,25 Tf

Excitation Voltage

10 VDC- Maximum 15 VDC

Nominal Output

2.0 m V/ V

Non - Linearity

< ±0.1% FSO (Full Scale Output)

Hysteresis

< ±0.15% FSO

Non-Repeatability

< ±0.1% FSO

Creep (30 minutes)

< ±0.02% FSO

Zero Balance

±1.0% FSO

Input Resistance

770 ± 15 Ohms

Output Resistance

700 ± 5 Ohms

Insulation Resistance (50 VDC)

> 1000 Mega Ohms

Certification

CE Certified

Safe Overload of Rated Capacity

150%

Ultimate Overload of Rated Capacity

300%

Temp. Compensated Range

0-500C

Temperature Effect on Output

< 0.01% FSO/ 0C

Temperature Effect on Zero

< 0.01% FSO/ 0C

Deflection

< 0.4 mm at FSO

Finish & Construction

Electroless Nickel Plated Tool Steel

Surge Protector / Junction Box

MVR Technology has introduced a Lightning protection Junction box for Analog & Digital load cell with better protection against lightning and high voltage Surge. Special components to enhance protection against Lightning Strikes have been incorporated. This will enhance performance, reduce down time and reduce field calls for WIM installations using DESB Load cells..

IR LIGHT CURTAINS(FROS)

Specifications

Power Supply

12 - 24 Volts DC

Supply Protection

Reverse Polarity Protected

Output

PNP or NPN / NO or NC

Output Indications

Through LEDs

Channel Indication

LED indication for each channel

Response Time

On to Off : 10 - 15 m.sec. Off to On : 50 - 100 m.sec

No of Beams

4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64

Beam bypass

Provided in hand/body protection models

Protected Heights

90 - 2000 mm

Pitch offered

11, 20, 30,40, 50, 90mm

Adjustable Range

Up to 3 meters (Higher range up to 40 meters available)

Standard Cable length

5 meters for emitter, 3 meters for receiver

Operating Temperature

Up to 55 Degrees centigrade

Cross Section

36 x 42 mm

Electrical Connections

Plug in Connector for Emitter & Receiver

Applicable to

Directly work with PLCs / Controllers

Protections

Output short circuit protected

Vibration Resistance

Amplitude: 0.75 mm (p) Freq : 10 - 55 Hzs, Rate : 1 Octave / min

Operating Light

500 Lux (max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees

MVR WIM FEAUTRES

  • Optimal pricing
  • Quick and trouble free installation
  • High vehicle throughput
  • Maximize operational Productivity and cost savings
  • Automatic vehicle counter and immediate indication of the vehicle overload
  • Dust and waterproof wirings for easy and reliable connection
  • Gross weight, axle weights, numbers of axles can be recorded along with average speed
  • Data records can be stored for future use or can be sent via LAN or Internet to the server

M V R TECHNOLOGY
X